Show Ntp Client Server-List - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show ntp client server-list

Displays a list of the servers with which the NTP client synchronizes.
show ntp client server-list
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show ntp client server-list
IP Address
================+===+=======+====+==========+=================+==========
198.206.181.70
output definitions
IP Address
Ver
Key
St
Delay
Offset
Disp
Release History
Release 6.6.1; command was introduced.
page 5-14
Ver Key St
4 0 2
The server IP address.
The version of NTP the server is using. Versions 3 and 4 are valid.
The NTP server's public key. This must be accurate and the same as the
NTP server, or the client switch will not be able to synchronize with the
NTP server. A zero (0) means there is no key entered.
The stratum of the server.
The delay received from the server in its timestamp.
The offset received from the server in its timestamp.
The dispersion value received from the server in its timestamp.
Delay Offset
0.167 0.323
OmniSwitch 6250 CLI Reference Guide
Network Time Protocol Commands
Disp
0.016
November 2009