Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 718

1/21
1/21
1/22
1/22
1/23
1/23
1/24
1/24 Active
-> show interfaces 1/24 pause
Slot/Port Active
-----------+--------+---------------+--------+-----------+-----------
1/24
1/24 Active
output definitions
Slot/Port
Active
Wait time
Cfg-Pause
Cfg-Cross
Hybrid Type
Release History
Release 6.6.1; command was introduced.
Related Commands
show interfaces hybrid pause
MIB Objects
esmConfTable
esmPortSlot
esmPortIF
esmPortPauseSlotTime
esmPortCfgCrossover
esmPortActiveHybridType
dot3PauseTable
dot3PauseSlotTime
page 20-46
- 0
- 0
- 0
- 0
- 0
- 0
- 0
65535
Wait time(usec) Cfg-Pause
- 0
65535
Interface slot and port number
Interface status.
The amount of time, in microseconds, the neighbor interface will wait
after receiving a PAUSE frame from the local interface.
The flow control setting (Tx = transmit, Rx = receive, Tx-N-Rx =
transmit and receive). Configured through the
mand.
The user-configured cross-over setting (Auto, MDI, or MDIX). Con-
figured through the
The configured active media type for a hybrid port (F = fiber, C = cop-
per, NA = not applicable).
Displays flow control pause settings for combo ports.
DIS MDI
DIS Auto
DIS MDI
DIS Auto
DIS MDI
DIS Auto
Tx MDI
Tx-N-Rx Auto
Cfg-Cross Hybrid Type
Tx MDI
Tx-N-Rx Auto
interfaces crossover
OmniSwitch 6250 CLI Reference Guide
Ethernet Port Commands
-
-
-
-
-
-
-
C
-
C
interfaces pause com-
command.
November 2009