Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 91

Chassis Management and Monitoring Commands
output definitions
Model Name
Description
Part Number
Hardware Revision
Serial Number
Manufacture Date
Firmware Version
Admin Status
Operational Status
Power Consumption
Power Control Checksum
MAC Address
ASIC - Physical
CPLD - Physical
UBOOT Version
UBOOT-miniboot Version
POE SW Version
C20L Upgd FailCount
Release History
Release 6.6.1; command was introduced.
OmniSwitch 6250 CLI Reference Guide
The NI's module name. For example, OS9-GNI-C24 indicates a twenty
four-port 10/100/1000BaseT Ethernet module.
A general description of the NI. For example, 24pt 10/100/1000BaseT
Mod indicates a twenty four-port 10/100/1000BaseT Ethernet module.
The Alcatel-Lucent part number for the NI.
The hardware revision level for the NI.
The Alcatel-Lucent serial number for the NI's printed circuit board
(PCB).
The date the NI was manufactured.
The firmware version for the NI's ASICs.
The current power status of the NI. Options include POWER ON or
POWER OFF.
The operational status of the NI. Options include UP or DOWN. The
operational status can be DOWN while the power status is on, indicat-
ing a possible software issue.
The current power consumption for the CMM.
The current power control checksum for the corresponding NI.
The MAC address assigned to the NI.
General information regarding the NI module's ASICs.
General information regarding the CPLD.
UBOOT version of the NI.
UBOOT-miniboot version of the NI.
POE software version of the NI (POE modules only).
The number of failed upgrade attempts (C20L modules that have
attempted to be upgraded only).
November 2009 page 2-39