Ntp Broadcast-Delay - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

ntp broadcast-delay

Sets the broadcast delay time in microseconds.
ntp broadcast delay microseconds
Syntax Definitions
microseconds
Defaults
parameter
microseconds
Platforms Supported
OmniSwitch 6250
Usage Guidelines
When running in the NTP client broadcast mode, a broadcast delay must be set. The broadcast delay is the
number of microseconds added to the timestamp.
Examples
-> ntp broadcast delay 1000
-> ntp broadcast delay 10000
Release History
Release 6.6.1; command was introduced.
Related Commands
ntp broadcast
MIB Objects
alaNtpBroadcastDelay
page 5-8
The number of microseconds for the broadcast delay.
default
4000
Enables or disables the client's broadcast mode.
OmniSwitch 6250 CLI Reference Guide
Network Time Protocol Commands
November 2009