Show Loopback-Detection - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Loopback Detection Commands

show loopback-detection

Displays the global LBD configuration information for the switch.
show loopback-detection
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
•
Use this command to display the global configuration of LDB.
•
To view information for a specific port, use the
Examples
-> show loopback-detection
Global LBD Status
Global LBD Transmission Timer
Global LBD Auto-recovery Timer
-> show loopback-detection port 1/1
Global LBD Status
Global LBD Transmission Timer
Global LBD Auto-recovery Timer
Port LBD Status
Port LBD State
output definitions
Global LBD Status
Globas LBD Transmission
Timer
Global LBD Auto-recovery
Timer
OmniSwitch 6250 CLI Reference Guide
show loopback-detection port
: Enabled
: 200 sec
: 300 sec
: Enabled
: 200 sec
: 300 sec
: Enabled
: Normal
The current status of LBD of the switch (Enabled or Disabled).
Displays the time interval in seconds between LBD packet transmis-
sions.
Displays the autorecovery time period in seconds. It is the time period
that passes after which ports that were shut down through LBD are
moved to normal state.
November 2009
command.
page 17-7