Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 714

output definitions (continued)
Crossover
Speed
Duplex
Release History
Release 6.6.1; command was introduced.
Related Commands
interfaces autoneg
interfaces crossover
interfaces speed
interfaces duplex
show interfaces status
MIB Objects
esmConfTable
esmPortCfgAutoNegotiation
esmPortCfgFlow
esmPortCfgCrossover
esmPortCfgSpeed
esmPortAutoDuplexMode
page 20-42
In the row labeled CAP, the field displays the valid cross over configu-
rations for the port. In the row label DEF, the field displays the default
cross over settings for the port. The possible values are Auto,
MDI/X/Auto (MDI/MDIX/Auto), or -- (not configurable and/or not
applicable).
In the row labeled CAP, the field displays the valid line speed configu-
rations for the port. In the row label DEF, the field displays the default
line speed settings for the port. The possible values are 10/100, 100,
1G, 10/100/1G, 10G, or Auto.
In the row labeled CAP, the field displays the valid duplex configura-
tions for the port. In the row label DEF, the field displays the default
duplex settings for the port. The possible values are Full, Full/Half, or
Auto.
Enables and disables auto negotiation.
Configures crossover port settings.
Configures interface speed.
Configures duplex settings.
Displays interface line settings.
OmniSwitch 6250 CLI Reference Guide
Ethernet Port Commands
November 2009