Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 909

Hide thumbs Also See for OmniSwitch 6250:
Table of Contents

Advertisement

VLAN Stacking Commands
output definitions
Bandwidth Sharing
Inner Tag Option
Priority Mapping
Priority Value
CIR
CBS
PIR
PBS
Release History
Release 6.6.1; command was introduced.
Related Commands
ethernet-service sap-profile
ethernet-service sap
ethernet-service sap sap-profile
show ethernet-service sap
show ethernet-service statistics
MIB Objects
alaEServiceSapProfileTable
alaEServiceSapProfileID
alaEServiceSapProfileCVLANTreatment
alaEServiceSapProfilePriorityMapMode
alaEServiceSapProfileFixedPriority
alaEServiceSapProfileIngressBW
alaEServiceSapProfileBandwidthShare
alaEServiceSapProfileCIR
alaEServiceSapProfileCBS
alaEServiceSapProfilePIR
alaEServiceSapProfilePBS
OmniSwitch CLI Reference Guide
The status of bandwidth sharing (enable or disable). If enabled, the
ingress bandwidth value is shared across all SAP ports and CVLANs. If
disabled, the bandwidth value is not shared and applied to individual
SAP ports and CVLANs.
Indicates how the CVLAN tag is processed (translate or preserve). If
set to preserve, the CVLAN tag is retained and the SVLAN is added to
the frame. If set to translate, the CVLAN tag is changed to the SVLAN
tag.
Indicates how the priority value is configured for the SVLAN (in-out
or fixed). If set to in-out, the CVLAN priority value is mapped to the
SVLAN. If set to fixed, a user-specified priority value is used for the
SVLAN priority.
Indicates the priority value mapped to the SVLAN (a number, P, or
DSCP). A number indicates a fixed, user-specified value is used; P
indicates the CVLAN 802.1p bit value is used; DSCP indicates the
CVLAN DSCP value is used.
Committed Information Rate, in bps.
Committed Burst Size, in bytes.
Peak Information Rate, in bps.
Peak Burst Size, in bytes.
Creates a profile for a VLAN Stacking Service Access Point (SAP).
Creates a VLAN Stacking SAP and associates the SAP with a service
and SAP profile.
Specifies a different SAP profile for the SAP.
Displays configuration information for VLAN Stacking SAPs.
Displays the TCM packet counts by service or for a specific SAP ID.
November 2009
page 24-47

Advertisement

Table of Contents
loading

Table of Contents