Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 504

Examples
-> bridge mode flat
-> bridge msti 0 1/24 priority 12
-> bridge msti 2 1/24 priority 5
-> bridge mode 1x1
-> bridge msti 0 1/24 priority 12
-> bridge msti 2 1/24 priority 5
Release History
Release 6.6.1; command was introduced.
Related Commands
bridge mode
bridge slot/port priority
bridge cist slot/port priority
bridge 1x1 slot/port priority
MIB Objects
vStpInsPortTable
vStpInsPortNumber
vStpInsPortPriority
page 16-64
Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
Implicit command for configuring the Spanning Tree priority value for a
port or an aggregate of ports that applies to the specified CIST or VLAN
instance.
Explicit command for configuring the Spanning Tree priority value for a
port or an aggregate of ports for the CIST instance when the switch is
operating in either the 1x1 or Tree mode.
Explicit command for configuring the Spanning Tree priority value for a
port or an aggregate of ports for a VLAN instance when the switch is
operating in either the 1x1 or flat mode.
OmniSwitch 6250 CLI Reference Guide
Distributed Spanning Tree Commands
November 2009