Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 821

VLAN Management Commands
output definitions (continued)
stree 1x1
stree flat
ip
mble tag
name
Release History
Release 6.6.1; command was introduced.
Related Commands
show vlan
show vlan port
OmniSwitch 6250 CLI Reference Guide
VLAN Spanning Tree status for the VLAN in the 1x1 mode: on
(enabled) allows the Spanning Tree algorithm to determine the state of
VLAN ports (forwarding or blocking); off (disabled) prevents Span-
ning Tree algorithm from controlling VLAN ports, leaving active ports
in a forwarding state. Configured through the
VLAN Spanning Tree status for the VLAN in the flat mode: on
(enabled) allows the Spanning Tree algorithm to determine the state of
VLAN ports (forwarding or blocking); off (disabled) prevents Span-
ning Tree algorithm from controlling VLAN ports, leaving active ports
in a forwarding state. Configured through the
IP router interface status: on (IP interface exists for the VLAN) or off
(no IP router interface exists for the VLAN). Use the
mand to define an IP router interface for a VLAN.
Mobile tagging status: on (enabled); off (disabled). Configured through
the vlan mobile-tag command.
The user-defined text description for the VLAN. By default, the VLAN
ID is specified for the VLAN description.
Displays a list of VLANs configured on the switch.
Displays VLAN port assignments.
November 2009
vlan stp command.
vlan stp command.
ip interface com-
page 22-21