Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 740

Examples
-> show interfaces 1/25 hybrid fiber
Slot/Port 1/25 :
Operational Status
Last Time Link Changed : FRI DEC 27 15:10:23 ,
Number of Status Change: 0,
Type
MAC address
BandWidth (Megabits)
Autonegotiation
Long Accept
Long Frame Size(Bytes) : 9216,
Rx
Bytes Received
Broadcast Frames:
UnderSize Frames:
Lost Frames
CRC Error Frames:
Tx
Bytes Xmitted
Broadcast Frames:
UnderSize Frames:
Lost Frames
Error Frames
output definitions
Slot/Port
Operational Status
Last Time Link Changed
Number of Status Change
Type
MAC address
Bandwidth
Duplex
Autonegotiation
Long Accept
Runt Accept
Long Frame Size
Runt Size
Bytes Received
Rx Unicast Frames
Rx Broadcast Frames
Rx M-cast Frames
Rx Undersize Frames
Rx Oversize Frames
page 20-68
: down,
: Ethernet,
: 00:d0:95:b2:39:b2,
: 1000,
: 1 [ 1000-F
: Enable,
:
:
:
:
:
:
:
Interface slot and port.
Interface status (up/down).
The last time the configuration for this interface was changed.
The total number of times that the configuration of this interface has
changed.
Interface type (Ethernet/Fast Ethernet/Gigabit Ethernet).
Interface MAC address.
Bandwidth (in megabits).
Duplex mode (Half/Full/Auto).
The auto negotiation settings for this interface.
Long Frames status (enable/disable).
Runt Frames status (enable/disable).
Long Frame Size (in Bytes).
Runt Frame Size (in Bytes).
Number of Bytes received.
Number of unicast frames received.
Number of broadcast frames received.
Number of multicast frames received.
Number of undersized frames received.
Number of r oversized frames received.
Duplex
Runt Accept
Runt Size(Bytes) : 64,
0, Unicast Frames :
0, M-cast Frames :
0, OverSize Frames:
0, Error Frames :
0, Alignments Err :
0, Unicast Frames :
0, M-cast Frames :
0, OverSize Frames:
0, Collided Frames:
0
OmniSwitch 6250 CLI Reference Guide
Ethernet Port Commands
: -,
],
: Disable,
0,
0,
0,
0,
0,
0,
0,
0,
0,
November 2009