Delete - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

delete

Deletes an existing file.
delete [path/]filename
Syntax Definitions
path/
filename
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Be sure to separate path directories and file names with a slash (/). Refer to the examples below.
•
Use care when deleting files. Depending on your switch and network configurations, specific configu-
ration and image files must be present for your system to work properly.
•
This command can also be used on the secondary CMM.
Examples
-> delete test_config_file
-> delete flash/test_config_file
Release History
Release 6.6.1; command was introduced.
Related Commands
rm
MIB Objects
systemServices
systemServicesArg1
systemServicesAction
page 7-18
The path (i.e., location) containing the file being removed. If no path is
specified, the command assumes the current directory.
The name of the existing file being removed. Up to thirty-two (32) char-
acters may be used (e.g., test_config_file).
Deletes an existing file or directory.
OmniSwitch 6250 CLI Reference Guide
File Management Commands
November 2009