Show Interfaces Hybrid Port - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show interfaces hybrid port

Displays interface port status (up or down) for combo ports.
show interfaces [slot[/port[-port2]]] hybrid {fiber |copper} port
Syntax Definitions
slot
port
port2
fiber
copper
Defaults
If a specific slot or slot/port number is not entered with this command, the port status for all switch combo
ports is displayed.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Enter a slot and port number or a range of port numbers to display information for a specific combo
port or a range of combo ports.
•
Enter a slot number to display information for all combo ports on a specific slot.
Examples
-> show interfaces 1/25 hybrid fiber port
Slot/Port Admin Status
----------+--------------+------------+----------------------------------------
1/25
output definitions
Slot/Port
Admin Status
Link Status
Alias
Release History
Release 6.6.1; command was introduced.
page 20-90
Slot number you want to display.
Port number of the interface you want to display.
Last port number in a range of ports you want to display.
Specifies that the status of the SFP port(s) will be displayed.
Specifies that the status of the copper RJ-45 port(s) will be displayed.
Link Status
enable down
Interface slot and port number.
Port status (enable/disable).
Operational status (enable/disable).
Interface alias.
Alias
""
OmniSwitch 6250 CLI Reference Guide
Ethernet Port Commands
November 2009