Show Mac-Range Alloc - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Chassis MAC Server (CMS) Commands

show mac-range alloc

Displays all allocated addresses from the MAC range table.
show mac-range [index] alloc
Syntax Definitions
index
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If you are assigning VLAN router ports while the switch is in single MAC router mode, all VLAN router
ports will use the base chassis MAC address (ID value 0).
Examples
-> show mac-range alloc
Range Mac Address
-----+-----------------+--------------------+---
01 00:d0:95:6b:09:40 CHASSIS
01 00:d0:95:6b:09:41 802.1X
01 00:d0:95:6b:09:5f CHASSIS
output definitions
Range
Mac Address
OmniSwitch 6250 CLI Reference Guide
Identifies the MAC range by referring to its position in the MAC range
table. Currently, index position 1 only is supported.
Application Id
0
0
1
The MAC range's index number. The index number refers to the posi-
tion of the range in the MAC range table. Values may range from
1–20. MAC ranges are divided by index number into four distinct cate-
gories. Refer to page 3-7
Current MAC address allocated for a specific application.
November 2009
for more information.
page 3-9