Chassis Management and Monitoring Commands
Usage Guidelines
•
Note that when performing an update, it is important that the correct update file is used and that the file
is located in the /flash directory on the switch. Specifying the wrong file may impact the operation of
the switch.
•
A different update file is required depending on the type of switch and the type of update. The follow-
ing table provides a list of the required update files: CP - Need to verify update file names for 6250.
OmniSwitch
Update Type
6250
Uboot
Miniboot
Uboot and Miniboot
FPGA
Examples
OS6400-> update uboot 2
OS6400-> update uboot-miniboot
OS6400-> update fpga cmm
OS6400-> update miniboot 3
Release History
Release 6.6.1; command was introduced.
Related Commands
reload all
MIB Objects
systemServices
systemServicesArg1
systemServicesAction
OmniSwitch 6250 CLI Reference Guide
Update File
kuboot.bin
gminiboot.uboot
kuboot.bin
gminiboot.uboot
Gfpga.upgrade_kit
Reloads all the NIs and CMMs in a chassis.
November 2009
page 2-15