Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 363

Link Aggregation Commands
expire
none
Defaults
parameter
[active] [timeout] ....
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Use the no form of this command to restore the LACPDU bit settings to their default configuration.
•
When the actor admin state is set to none, all bit values are restored to their default configurations.
•
The ethernet, fastethernet, and gigaethernet keywords do not modify a port's configuration. See
Chapter 20, "Ethernet Port Commands,"
ports.
Examples
-> lacp agg 4/2 actor admin state synchronize no collect distribute
-> lacp agg 4/2 actor admin state no synchronize collect
-> lacp agg 4/2 actor admin state none
Release History
Release 6.6.1; command was introduced.
Related Commands
lacp linkagg size
show linkagg port
MIB Objects
alclnkaggAggPortTable
alclnkaggAggPortGlobalPortNumber
alclnkaggAggPortActorAdminState
OmniSwitch 6250 CLI Reference Guide
cates that the actor is using the defaulted partner information adminis-
tratively configured for the partner.
Specifying that this keyword has no effect because the system always
determines its value. When this bit (bit 7) is set by the system, the actor
cannot receive LACPDU frames.
Resets all administrative states to their default configurations.
default
active, timeout, aggregate
for information on CLI commands to configure Ethernet
Creates a dynamic aggregate group.
Displays information about ports associated with a particular aggregate
group or all aggregate groups.
November 2009 page 12-25