Lldp Notification Interval - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

lldp notification interval

Sets the time interval that must elapse before a notification about the local system MIB change is
generated.
lldp notification interval seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
The LLDP protocol and notification must be enabled before using this command.
•
In a specified interval, generating more than one notification-event is not possible.
Examples
-> lldp notification interval 25
Release History
Release 6.6.1; command was introduced.
Related Commands
lldp notification
show lldp local -system
MIB Objects
lldpConfiguration
lldpNotificationInterval
page 13-6
The minimum number of seconds for generating a notification-event.
The valid range is 5-3600.
default
5
Specifies the switch to control per port notification status about the
remote device change.
Displays local system information.
OmniSwitch 6250 CLI Reference Guide
802.1AB Commands
November 2009