Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 468

Related Commands
bridge mode
bridge priority
bridge cist priority
bridge msti priority
MIB Objects
vStpInsTable
vStpIns1x1VlanNumber
vStpInsMode
vStpInsPriority
vStpInsBridgeAddress
page 16-28
Selects a flat Spanning Tree or 1x1 (per VLAN) Spanning Tree operat-
ing mode for the switch.
Implicit command for changing the Spanning Tree priority for the flat
mode CIST instance or a 1x1 mode VLAN instance.
Explicit command for changing the Spanning Tree priority for the CIST
instance when the switch is operating in either the flat or 1x1 mode.
Explicit command for changing the Spanning Tree priority for an MSTP
MSTI when the switch is operating in either the flat or 1x1 mode.
OmniSwitch 6250 CLI Reference Guide
Distributed Spanning Tree Commands
November 2009