Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 496

Examples
-> bridge mode flat
-> bridge cist 4/1 enable
-> bridge cist 16 enable
-> bridge mode 1x1
-> bridge cist 5/10 enable
-> bridge cist 22 enable
Release History
Release 6.6.1; command was introduced.
Related Commands
bridge mode
bridge slot/port
bridge 1x1 slot/port
vlan stp
bridge bpdu-switching
MIB Objects
vStpInsPortTable
vStpInsPortNumber
vStpInsPortEnable
page 16-56
Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
Implicit command for configuring the Spanning Tree status on a port for
the flat mode CIST instance or for a 1x1 mode VLAN instance.
Explicit command for configuring the Spanning Tree status on a port or
an aggregate of ports for a VLAN instance when the switch is operating
in either the 1x1 or flat mode.
Enables or disables the Spanning Tree instance for a VLAN.
Enables or disables BPDU switching for the specified VLAN.
OmniSwitch 6250 CLI Reference Guide
Distributed Spanning Tree Commands
November 2009