Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 530

Examples
-> bridge mode flat
-> bridge cist 7/24 connection noptp
-> bridge mode 1x1
-> bridge cist 2/2 connection noptp
Release History
Release 6.6.1; command was introduced.
Related Commands
bridge mode
bridge slot/port connection
bridge cist slot/port admin-edge
bridge cist slot/port auto-edge
MIB Objects
vStpInsPortTable
vStpInsPortNumber
vStpInsPortAdminConnectionType
vStpInsPortOperConnectionType
page 16-90
Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
Implicit command for configuring the Spanning Tree connection type
for a port or an aggregate of ports for the CIST instance or for a VLAN
instance.
Configures the administrative edge port status for a port or aggregate
of ports for the CIST instance.
Configures whether or not Spanning Tree automatically determines the
operational edge status of a port or an aggregate of ports for the flat
mode CIST instance.
OmniSwitch 6250 CLI Reference Guide
Distributed Spanning Tree Commands
November 2009