exit
Ends the current CLI session. If the CLI session to the switch was via Telnet, the connection is closed.
exit
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If changes were made using the CLI and have not been saved with the
command, a warning message appears asking to confirm the user exit. To save changes, enter N at the
warning prompt and use the
Examples
-> exit
Release History
Release 6.6.1; command was introduced.
Related Commands
kill
MIB Objects
SessionMgr
sessionIndex
sessionRowStatus
page 6-26
copy running-config working
Kills an active session. The command takes effect immediately.
OmniSwitch 6250 CLI Reference Guide
Session Management Commands
copy running-config working
command.
November 2009