Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 526

Examples
-> bridge mode flat
-> bridge 1x1 255 4/1 mode forwarding
-> bridge 1x1 355 1/24 mode dynamic
-> bridge mode 1x1
-> bridge 1x1 255 2/2 mode blocking
-> bridge 1x1 355 3/12 mode forwarding
Release History
Release 6.6.1; command was introduced.
Related Commands
bridge mode
bridge slot/port mode
bridge cist slot/port mode
MIB Objects
vStpInsPortTable
vStpInsPortNumber
vStpInsPortManualMode
page 16-86
Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
Implicit command for configuring the Spanning Tree mode for a port or
an aggregate of ports for the CIST instance or for a VLAN instance.
Explicit command for configuring the Spanning Tree mode for a port or
an aggregate of ports for the CIST instance when the switch is operating
in either the 1x1 or flat Spanning Tree mode.
OmniSwitch 6250 CLI Reference Guide
Distributed Spanning Tree Commands
November 2009