Update - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

update

Updates the versions of Uboot, FPGA, BootROM, or Miniboot. Refer to the Release Notes and/or any
available Upgrade Instructions for the new release before performing this type of update on the switch.
update {uboot {cmm | ni {all | slot}} uboot-miniboot | fpga cmm | bootrom {all | slot} | [default |
backup] miniboot [all | slot] }
Syntax Definitions
uboot
ni
all
slot
uboot-miniboot
miniboot
Defaults
N/A
Platforms Supported
OmniSwitch 6250
page 2-14
Updates the uboot version.
Specifies that the update is performed for the Network Interface (NI)
Module.
Specifies that the update is performed for all slots within a chassis or all
switches within a stack.
Specifies the number of the NI module within a chassis or the switch
number within a stack for which the update is performed.
Updates the uboot and the miniboot version on all available slots on all
available switches within a stack.
Updates the miniboot version.
OmniSwitch 6250 CLI Reference Guide
Chassis Management and Monitoring Commands
November 2009