Show Interfaces Hybrid Counters - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show interfaces hybrid counters

Displays interface counters information (e.g., unicast, broadcast, multi-cast packets received/transmitted)
for combo ports.
show interfaces [slot[/port[-port2]]] hybrid {fiber |copper} counters
Syntax Definitions
slot
port
port2
fiber
copper
Defaults
If a specific slot or slot/port number is not entered with this command, the interface counters for all switch
combo ports is displayed.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Enter a slot and port number or a range of port numbers to display information for a specific combo
port or a range of combo ports.
•
Enter a slot number to display information for all combo ports on a specific slot.
•
These counters do not apply to Gigabit Ethernet traffic.
Examples
-> show interfaces 1/25 hybrid copper counters
InOctets = 54367578586897979, OutOctets
InUcastPkts = 55654265276,
InMcastPkts = 58767867868768777, OutMcastPkts
InBcastPkts = 576567567567567576, OutBcastPkts
InPauseFrames = 567798768768767,
output definitions
InOctets
OutOctets
InUcastPkts
OutUcastPkts
InMcastPkts
page 20-82
Slot number you want to display.
Port number of the interface you want to display.
Last port number in a range of ports you want to display.
Specifies that statistics for the SFP port(s) will be displayed.
Specifies that statistics for the copper RJ-45 port(s) will be displayed.
OutUcastPkts
OutPauseFrames= 786876,
Number of octets received.
Number of octets transmitted.
Number of unicast packets received.
Number of unicast packets transmitted.
Number of multicast packets received.
OmniSwitch 6250 CLI Reference Guide
Ethernet Port Commands
= 5.78E19,
= 5.78E20,
= 5465758756856,
= 786876,
November 2009