GVRP Commands
gvrp transparent switching
Enables transparent switching on the switch. When transparent switching is enabled, the switch propa-
gates GVRP information to other switches but does not register itself in the GVRP process.
gvrp transparent switching
no gvrp transparent switching
Syntax Definitions
N/A
Defaults
By default, transparent switching is disabled on the switch.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Use the no form of this command to disable transparent switching on the device.
•
If GVRP is globally disabled and transparent switching is enabled, the router will flood the GVRP
messages.
•
If GVRP is globally disabled and transparent switching is disabled, the router will discard the GVRP
messages.
•
If GVRP is globally enabled transparent switching will not have any effect on the functional behavior
of the device.
Examples
-> gvrp transparent switching
-> no gvrp transparent switching
Release History
Release 6.6.1; command was introduced.
Related Commands
show gvrp configuration
MIB Objects
alaGvrpTransparentSwitching
OmniSwitch 6250 CLI Reference Guide
Displays the global configuration for GVRP.
November 2009
page 23-5