Chapter 20 Ethernet Port Commands - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

20 Ethernet Port Commands
The Ethernet port software is responsible for configuring and monitoring Ethernet ports. This includes:
•
Performing hardware diagnostics, loading software, and initializing hardware.
•
Notifying other software modules in the system when Ethernet links become active or inactive.
•
Configuring basic line parameters for Ethernet ports.
•
Gathering basic line statistics for Ethernet ports and passing this information to the user interface and
configuration manager.
MIB information for the Ethernet Port commands is as follows:
Filename: AlcatelIND1Port.mib
Module: alcatelIND1PortMIB
Filename: IETF_ETHERLIKE.mib
Module: EtherLike-MIB
OmniSwitch 6250 CLI Reference Guide November 2009 page 20-1