Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 662

Examples
-> port-security 4/20 mac-range low 00:20:95:00:fa:5c
-> port-security 5/11-15 mac-range low 00:da:95:00:00:10 high 00:da:95:00:00:1f
-> port-security 5/16-20 mac-range high 00:da:95:00:00:1f
-> port-security 5/11-15 mac-range
Release History
Release 6.6.1; command was introduced.
Related Commands
port-security
port-security mac
port-security shutdown
port-security maximum
port-security violation
MIB Objects
learnedPortSecurityTable
lpsLoMacRange
lpsHiMacRange
lpsRowStatus
page 19-14
Enables or disables Learned Port Security (LPS) on the switch port(s).
Configures a single authorized source MAC address for a port that
belongs to a specified VLAN.
Configures the amount of time in minutes to allow source learning on all
LPS ports. Also, enables or disables the conversion of dynamic MAC
addresses to static MAC addresses on LPS ports.
Specifies the maximum number of source MAC addresses that an LPS
port(s) is allowed to learn.
Selects the method for handling traffic that does not comply with LPS
restrictions for the specified port.
OmniSwitch 6250 CLI Reference Guide
Learned Port Security Commands
November 2009