Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 137

Power over Ethernet (PoE) Commands
output definitions (continued)
Status
Priority
On/Off
Max Watts
Class
Release History
Release 6.6.1; command was introduced.
Related Commands
N/A
MIB Objects
alaPethMainPseGroup
alaPethMainPseAdminStatus
pethPsePortTable
pethPsePortAdminEnable
alaPethPsePortTable
alaPethPsePortPowerMaximum
alaPethMainPseGroup
alaPethMainPseMaxPower
pethMainPsePower
pethPsePortGroup
pethPsePortPowerPriority
OmniSwitch 6250 CLI Reference Guide
Displays the current operational status. Options include Powered On,
Powered Off, and Undefined.
The current priority level for the corresponding PoE port. Options
include Critical, High, and Low. Critical should be reserved for ports
that have mission-critical devices attached, and therefore require top
(i.e., critical) priority. In the event of a power management issue, inline
power to critical ports is maintained as long as possible. High indicates
ports that have important, but not mission-critical, devices attached. If
other ports in the chassis have been configured as critical, inline power
to high-priority ports is given second priority. Low priority is for ports
that have low-priority devices attached. In the event of a power man-
agement issue, inline power to low-priority ports is interrupted first
(i.e., before critical and high-priority ports).
The default value is Low. Priority levels can be changed using the
lanpower priority command.
Displays whether a port has been manually turned on or off by the user.
ON indicates that the port has been turned on by the user via the
lanpower start command. OFF indicates that the port has been turned
off by the user via the lanpower stop
The maximum watts allocated to the corresponding slot. The maximum
watts value for a slot can be changed using the
command.
??? Need Info.
November 2009
command.
lanpower maxpower
page 4-15