Show Interfaces Hybrid Accounting - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Ethernet Port Commands

show interfaces hybrid accounting

Displays interface accounting information (e.g., packets received/transmitted, deferred frames received)
for combo ports.
show interfaces [slot[/port[-port2]]] hybrid {fiber |copper} accounting
Syntax Definitions
slot
port
port2
fiber
copper
Defaults
If a specific slot or slot/port number is not entered with this command, the accounting information for all
switch combo ports is displayed.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Enter a slot and port number or a range of port numbers to display information for a specific combo
port or a range of combo ports.
•
Enter a slot number to display information for all combo ports on a specific slot.
Examples
-> show interfaces 1/25 hybrid copper accounting
1/25 ,
Rx undersize packets
Tx undersize packets
Rx oversize packets
Tx oversize packets
Rx packets 64 Octets
Rx packets 65To127 Octets
Rx packets 128To255 Octets
Rx packets 256To511 Octets
Rx packets 512To1023 Octets
Rx packets 1024To1518 Octets =
Rx packets 1519to4095 Octets =
Rx packets 4096ToMax Octets
Rx Jabber frames
OmniSwitch 6250 CLI Reference Guide
Slot number you want to display.
Port number of the interface you want to display.
Last port number in a range of ports you want to display.
Specifies that statistics for the SFP port(s) will be displayed.
Specifies that statistics for the copper RJ-45 port(s) will be displayed.
=
=
=
=
=
=
=
=
=
=
=
November 2009
0,
0,
0,
0,
3073753,
678698,
21616,
21062,
2,
84,
0,
0,
0
page 20-79