Show Ip Bgp Summary - Dell Z9500 Command Reference Manual

172.16.0.2
*>
172.16.0.2

show ip bgp summary

Allows you to view the status of all BGP connections.
Z9500
Syntax
show ip bgp [vrf vrf-name] [ipv4 {multicast | unicast} | ipv6
unicast] summary
Parameters
vrf vrf-name
ipv4 multicast
ipv4 unicast
ipv6 unicast
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
482
66.0.0.0/24
(OPTIONAL) Enter the keyword vrf and then the name of
the VRF to view the status of all BGP connections
corresponding to that VRF.
(OPTIONAL) Enter the keyword ipv4 followed by the
keyword multicast to view information related only to ipv4
multicast routes.
(OPTIONAL) Enter the keyword ipv4 followed by the
keyword unicast to view information related only to ipv4
unicast routes.
(OPTIONAL) Enter the keyword ipv6 followed by the
keyword unicast to view information related only to ipv6
unicast routes.
EXEC
EXEC Privilege
Description
Added the ipv4 multicast and ipv6 unicast parameters.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
0 200 i
0 200 i
Border Gateway Protocol