down down
GigabitEthernet 1/1
down down
GigabitEthernet 1/2
up
GigabitEthernet 1/3
up
GigabitEthernet 1/4
up
GigabitEthernet 1/5
up
GigabitEthernet 1/6
down down
show ip management-route
View the IP addresses assigned to the Management interface.
C-Series, E-Series, Z-Series, S4810
Syntax
show ip management-route [all | connected | summary | static]
Parameters
all
connected
summary
static
Command Modes
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Example
FTOS#show ip management-route
Destination
820
(OPTIONAL) Enter the keyword all to view all IP addresses assigned
to all Management interfaces on the switch.
(OPTIONAL) Enter the keyword connected to view only routes
directly connected to the Management interface.
(OPTIONAL) Enter the keyword summary to view a table listing the
number of active and non-active routes and their sources.
(OPTIONAL) Enter the keyword static to view non-active routes
also.
•
EXEC
•
EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Introduced on the E-Series.
Gateway
unassigned
NO
Manual
unassigned
YES Manual
up
unassigned
YES Manual
up
unassigned
YES Manual
up
10.10.10.1
YES Manual
up
unassigned
NO
Manual
administratively
administratively
State