Show Ip Bgp Ipv6 Unicast Peer-Group - Dell Force10 S4810P Reference Manual

advertised-routes
dampened-routes
detail
flap-statistics
routes
Command Modes
Command History
Version 8.2.1.0
Version 7.4.1.0
Related show ip bgp
Commands

show ip bgp ipv6 unicast peer-group

Allows you to view information on the BGP peers in a peer group.
C-Series, E-Series
Syntax show ip bgp ipv6 unicast peer-group [peer-group-name [summary]]
Parameters
peer-group-name
detail
summary
Command Modes
Command History
Version 8.2.1.0
NOTE: The :: notation specifies successive hexadecimal fields of
zeros or enter an IP address in dotted decimal format to reset all
prefixes from that neighbor.
(OPTIONAL) Enter the keywords advertised-routes to view
only the routes the neighbor sent.
(OPTIONAL) Enter the keywords dampened-routes to view
information on dampened routes from the BGP neighbor.
(OPTIONAL) Enter the keyword detail to view neighbor-specific
internal information for the IPv6 address family.
(OPTIONAL) Enter the keywords flap-statistics to view flap
statistics on the neighbor's routes.
(OPTIONAL) Enter the keyword routes to view only the neighbor's
feasible routes.
• EXEC
• EXEC Privilege
Introduced on the E-Series ExaScale.
Introduced
– view the current BGP routing table.
(OPTIONAL) Enter the name of a peer group to view information about
that peer group only.
(OPTIONAL) Enter the keyword detail to view peer-group-specific
information for the IPv6 address family.
(OPTIONAL) Enter the keyword summary to view status information
of the peers in that peer group. The output is the same as that found
in show ip bgp summary command
• EXEC
• EXEC Privilege
Introduced on the E-Series ExaScale.
531