Command Modes
Command History
Version 8.2.1.0
Version 7.4.1.0
show ipv6 prefix-list
Displays the specified IPv6 prefix list.
Z-Series
Syntax
show ipv6 prefix-list detail {prefix-list name} | summary
Parameters
detail
prefix-list name
summary
Command Modes
EXEC
Command History
Version 9.0.0.0
Version 8.3.10.0
Related
ipv6
Commands
timers bgp
Allows you to adjust the BGP network timers for all neighbors.
C-Series, E-Series
Syntax
timers bgp keepalive holdtimer
To return to the default values, use the no timers bgp command.
Parameters
keepalive
holdtimer
536
•
EXEC
•
EXEC Privilege
Introduced on the E-Series ExaScale.
Introduced
Display a detailed description of the selected IPv6 prefix list.
Enter the name of the prefix list.
NOTE: There is a 140-character limit for prefix list names.
Display a summary of RPF routes.
Introduced on the Z9000.
Introduced on the S4810.
prefix-list– configures an IPv6 prefix-list.
Enter the time interval in seconds between which the E-Series sends
keepalive messages. The range is 1 to 65535. The default is 60
seconds.
Enter the time interval in seconds which the E-Series waits since the
last keepalive message before declaring a BGP peer dead. The range
is 3 to 65535. The default is 180 seconds.