Renault Laguna III Manual page 2550

Distribution motor: Removal - Refitting
AIR CONDITIONING 01 or AIR CONDITIONING 02
HEATING
135289
a Refit the A-pillar duct linkage (26) by inserting:
- the guide finger (27) in the cam groove (29) ,
- the guide finger (28) in the groove (30) of the A-pil-
lar air distribution flap.
a Refit the A-pillar duct linkage bolt.
Note:
The new distribution motor is configured to face
mode only.
a Refit the distribution motor.
a Connect the distribution motor connector.
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
a Apply the after repair procedure using the Diagnos-
135287
tic tool :
- connect the Diagnostic tool,
- select "Climate control computer",
- go to repair mode,
- display the "Before/after repair procedure" for the
computer selected,
- select "Footwell air distribution flap motor" in the
"List of components controlled by this computer"
section,
- carry out the operations described in the "After re-
pair procedure" section.
61A-53
61A
135617