Renault Laguna III Manual page 2553

Table of Contents

Advertisement

Humidity sensor: Removal - Refitting
AIR CONDITIONING 02
Equipment required
Diagnostic tool
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Unclip the lower cover (1) of the interior rear-view
mirror in the direction of the arrow.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Disconnect the humidity detector connector.
a Remove:
- the humidity detector bolts,
HEATING
- the humidity detector.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit the humidity detector.
a Connect the humidity detector connector.
II - FINAL OPERATION.
a Clip on the lower cover of the interior rear-view mir-
ror.
a Apply the after repair procedure using the Diagnos-
tic tool :
- connect the Diagnostic tool,
- select "Climate control computer",
- go to repair mode,
- display the "Before/after repair procedure" for the
selected computer,
- select "Passenger compartment temperature and
humidity detector" in the "List of components con-
trolled by this computer,
- carry out the operations described in the "After re-
pair procedure" section.
122523
19398
61A-56
61A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents