Setting Up The Operator Account; Figure 2.40 Selecting The [Operator Mode] Button - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 2 Operator Panel Operation

2.17 Setting Up the Operator Account

2.17 Setting Up the Operator Account
This section explains how to enable and disable the operator account.
If the operator account is enabled, logging in to the operator account in order to perform CAS operations is
required.
If performing CAS operations without logging in to the operator account are not desired due to security
concerns, enabling the operator account is recommended.
Procedure
1
Log in to the administrator account and then click the [Operator Mode] button from the
Setup menu.

Figure 2.40 Selecting the [Operator Mode] button

FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
68
Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0