Chapter 1 Workflow; When The Multipath Driver Is Not Used - Fujitsu ETERNUS DX Configuration Manual

Chapter 1
Workflow
This chapter describes how to connect the ETERNUS DX to a server running Linux.
Which documents need to be referred to varies with the connection environment. Refer to the workflow that
follows to determine which documents are required.
Required Documents
"Server Support Matrix"
•
"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETERNUS DX to
•
be connected
"Configuration Guide -Server Connection- (Fibre Channel/FCoE/iSCSI/SAS) for Linux device-mapper multi-
•
path"
"ETERNUS Web GUI User's Guide"
•
Manuals supplied with the server, SAS cards, and multipath driver
•
1.1

When the Multipath Driver is not Used

The documents and workflow required when a multipath driver is not used are as follows.
Workflow
Setting Up the ETERNUS DX
Set the various parameters required to operate the ETERNUS DX.
• Checking the setup and maintenance operations
"Chapter 2 Checking the Server Environment" (page 10)
-
"Chapter 4 Setting Up the ETERNUS DX" (page 13)
-
- "ETERNUS Web GUI User's Guide"
Setting up the ETERNUS DX
•
"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETER-
-
NUS DX to be connected
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Linux
Copyright 2018 FUJITSU LIMITED
6
P3AM-3472-14ENZ0