1.
ETERNUS AX/HX Installation
Installation Area
Installation Area
This section explains the installation areas and the service areas that are required for an ETERNUS AX/HX that is
installed in a Fujitsu 19-inch rack.
Secure service areas in the front and rear of the 19-inch rack.
Figure 12
Installation Area and Service Area (When the Lifter Is Not Used)
Rear service area
Top
19-inch rack
Front service area
560 mm or more (*1)
*1:
The areas on the left and right of the front service area are not required if the ETERNUS AX/HX is installed in the rack.
850 mm or more
1,016 mm or more
560 mm or more (*1)
28
Site Planning Guide