Unconfigure Sflow - Extreme Networks ExtremeWare XOS Command Reference Manual

Version 11.0

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

Commands for Status Monitoring and Statistics

unconfigure sflow

Resets all the sFlow values to the default values.

Syntax Description

This command has no arguments or variables.

The default values are as follows

• sFlow agent IP address—0.0.0.0

• sampling frequency—sample one every 8196 packets

• polling interval—20 seconds

• sFlow collector UDP port—6343

• maximum CPU sample limit—2000 samples per second

Usage Guidelines

This command resets all the sFlow values to default value, and removes any port configurations, and

any sFlow collectors configured on the switch.

The following command unconfigures sFlow:

unconfigure sflow

This command was first available in ExtremeWare XOS 11.0.

ExtremeWare XOS 11.0 Command Reference Guide

Extremeware xos 11.0