Commands for Status Monitoring and Statistics
unconfigure sflow agent
unconfigure sflow agent
Description
Resets the sFlow agent IP address to the default value.
NOTE
This command is available only on the "i" series switches.
Syntax Description
This command has no arguments or variables.
Default
The default IP address is 0.0.0.0.
Usage Guidelines
This command resets the sFlow agent IP address to its default value.
Example
The following command resets the source IP address to 0.0.0.0 for UDP datagrams sent out by the
sFlow agent:
unconfigure sflow agent
History
This command was first available in ExtremeWare 7.3.0.
Platform Availability
This command is available on "i" series platforms.
834
ExtremeWare 7.7 Command Reference Guide