Unconfigure Sflow Agent - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

unconfigure sflow agent

Resets the sFlow agent IP address to the default value.

This command is available only on the "i" series switches.

Syntax Description

This command has no arguments or variables.

The default IP address is 0.0.0.0.

Usage Guidelines

This command resets the sFlow agent IP address to its default value.

The following command resets the source IP address to 0.0.0.0 for UDP datagrams sent out by the sFlow

unconfigure sflow agent

This command was first available in ExtremeWare 7.3.0.

Platform Availability

This command is available on "i" series platforms.

ExtremeWare 7.5 Command Reference Guide

Extremeware 7.5