Specifying The End-User Test Failed Pop-Up Window - Extreme Networks Sentriant AG Software User's Manual

System Configuration
b Test successful message (final screen) —Enter the text for the final, test successful window.
Extreme Networks, Inc. recommends that this text informs the end-user that the test was
successful and provides any additional helpful information such as instructions, notices, and so
on.
c Footer (most screens) —Enter the text for the footer that appears on most of the end-user
windows. Extreme Networks, Inc. recommends that this text includes a way to contact you if they
need further assistance. You can format the text in this field with HTML characters.
2 Click ok.

Specifying the End-user Test Failed Pop-up Window

To specify the end-user test failed pop-up window:
Home window>>System configuration>>End-user screens
1 Select the Pop up an end-user notification when an endpoint fails one or more tests check box to
turn the pop-up window on (clear the check box to turn it off).
2 Enter the customization information:
a Notification pop-up URL—In the Notification pop-up URL text box, the
default is:
https://ServerIpaddress:89
This URL points to port 89 on the Sentriant AG ES (the default end-user screen that shows the
test failed results), and is where the user is directed to when they click the Get details button on
the new pop-up window.
NOTE
Enter a different URL if you have a custom window you want the users to see. For example, you might have a
location that provides links to patch or upgrade their software.
b Test failed pop-up message—In the Test failed pop-up message text box, enter the message the
end-user views on the standard pop-up window.
NOTE
You can verify your changes to the end-user access screens immediately by pointing a browser window to port 88 of
your Sentriant AG installation. For example, if the IP address of your Sentriant AG installation is 10.0.16.18, point
the browser window to:
http://10.0.16.18:88
3 Click ok.
138
Sentriant AG Software Users Guide, Version 5.2