Reset Inline-Power Ports - Extreme Networks ExtremeWare Command Reference Manual

Power Over Ethernet Commands—Summit 300 and 400-24p Switches and Alpine PoE Module

reset inline-power ports

reset inline-power ports <portlist>
Description
Power cycles the specified ports.
NOTE
This command is available only for the Alpine FM-32Pi PoE Module and the Summit 300-48 switch.
Syntax Description
portlist Specifies one or more slots and ports for which power is to be reset. On a modular switch, can be a list
of slots and ports. On a stand-alone switch, can be one or more port numbers. May be in the form 1, 2,
3-5, 1:*, 1:5, 1:6-1:8.
Default
N/A
Usage Guidelines
This command power cycles the specified ports. Ports are immediately de-powered and re-powered,
maintaining current power allocations.
Example
The following command resets power for port 4:
reset inline-power ports 4
History
This command was first available in ExtremeWare 7.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available only on Alpine FM32-Pi PoE Modules and the Summit 300-48 switch.
2310 ExtremeWare 7.5 Command Reference Guide