Disable Inline-Power - Extreme Networks ExtremeWare Command Reference Manual

disable inline-power

disable inline-power
disable inline-power
Description
Shuts down power currently provided on all ports on all slots.
NOTE
This command is available only for the Alpine FM-32Pi PoE Module and the Summit 300-48 switch.
Syntax Description
This command has no arguments or variables.
Default
Enable
Usage Guidelines
You can control whether inline power is provided to the system by using the
disable inline-power
command and the enable inline-power command. Using the command shuts
disable inline-power
down power currently provided on all ports on all slots. By default, inline power provided to the
system is enabled.
Example
The following command shuts down power currently provided on all ports on all slots:
disable inline-power
History
This command was first available in ExtremeWare 7.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available only on Alpine FM32-Pi PoE Modules and the Summit 300-48 switch.
ExtremeWare 7.5 Command Reference Guide 2295