Configure Lldp Ports Vendor-Specific Dot3 Max-Framesize - Extreme Networks ExtremeWare Command Reference Manual

configure lldp ports vendor-specific dot3 max-framesize

configure lldp ports [all | <portlist>] [advertise | no-advertise]
vendor-specific dot3 max-framesize
Description
Configures LLDP ports to advertise or not advertise its maximum frame size to its neighbors. Since this
is a vendor specific option, there may not be support for this from the neighbor.
Syntax Description
all
portlist
advertise
no-advertise
Default
The default is not to advertise.
Usage Guidelines
N/A.
Example
The following command configures ports 1:12 - 1:13 to advertise the maximum frame size
to neighbors.
configure lldp ports 1:12 - 1:13 no-advertise vendor-specific dot3 max-framesize
History
This command was first available in ExtremeWare 7.4.
Platform Availability
This command is available on all Extreme switches.
ExtremeWare 7.5 Command Reference Guide
Applies to all ports on the switch.
Specifies a list of switch ports in the form i:*, i:n, or i:n-i-m.
Specifies that information is to be sent to neighbors.
Specifies that information is not to be sent to neighbors.
configure lldp ports vendor-specific dot3 max-framesize
2349