Configure Lldp Ports System-Description - Extreme Networks ExtremeWare Command Reference Manual

configure lldp ports system-description

configure lldp ports [all | <portlist>] [advertise | no-advertise]
system-description
Description
Configures LLDP ports to advertise or not to advertise its system description to its neighbors.
Syntax Description
all
portlist
advertise
no-advertise
Default
The default is not to advertise.
Usage Guidelines
N/A.
Example
The following command configures port 1:4 through port 1:8 to not advertise the system
description information to neighbors.
configure lldp ports 1:4 - 1:8 no-advertise system-description
History
This command was first available in ExtremeWare 7.4.
Platform Availability
This command is available on all Extreme switches.
ExtremeWare 7.5 Command Reference Guide
Applies to all ports on the switch.
Specifies a list of switch ports in the form i:*, i:n, or i:n-i-m.
Specifies that information is to be sent to neighbors.
Specifies that information is not to be sent to neighbors.
configure lldp ports system-description
2341