Configure Lldp Ports System-Capabilities - Extreme Networks ExtremeWare Command Reference Manual

LLDP Commands

configure lldp ports system-capabilities

configure lldp ports [all | <portlist>] [advertise | no-advertise]
system-capabilities
Description
Configures LLDP ports to advertise or not to advertise its system capabilities to its neighbors.
Syntax Description
all
portlist
advertise
no-advertise
Default
The default is not to advertise.
Usage Guidelines
N/A.
Example
The following command configures all ports to advertise system capability information to neighbors.
configure lldp ports all advertise system-capabilities
History
This command was first available in ExtremeWare 7.4.
Platform Availability
This command is available on all Extreme switches.
2340
Applies to all ports on the switch.
Specifies a list of switch ports in the form i:*, i:n, or i:n-i-m.
Specifies that information is to be sent to neighbors.
Specifies that information is not to be sent to neighbors.
ExtremeWare 7.5 Command Reference Guide