Book Title
Figure 273: Adding a group for the user
4 Click the Dial-in tab and select the Allow access and the No Callback radio buttons (see
Figure
274).
Click OK to continue.
Figure 274: The Dial-in tab configuration
Step 3. Enable Ridgeline as a RADIUS Client
Within the Internet Authentication Service, enable Ridgeline as a RADIUS client.
1 Under the Internet Authentication Service click RADIUS Clients, then New> RADIUS Client.
2 Type a Friendly Name for the RADIUS client and type the IP address or host name of the Ridgeline
server. Click Next to continue.
334
Ridgeline Concepts and Solutions Guide