Show Checkpoint-Data - Extreme Networks ExtremeWare XOS Command Reference Manual

show checkpoint-data

show checkpoint-data {<process>}
Description
Displays the status of one or more processes being copied from the master MSM to the backup MSM.
Syntax Description
process
Default
N/A.
Usage Guidelines
This command displays, in percentages, the amount of copying completed by each process and the
traffic statistics between the process on both the master and the backup MSMs.
This command is also helpful in debugging synchronization problems that occur at run-time. To check
the status of synchronizing the MSMs, use the
Example
The following command displays the checkpointing status and the traffic statics of all of the processes
between the master and the backup MSM:
show checkpoint-data
The following is sample output from this command:
Process
------------------------------------------------------------------
devmgr
ems
msgsrv
nodemgr
dirser
cfgmgr
cli
snmpSubagent
snmpMaster
edp
vlan
eaps
aaa
fdb
stp
esrp
rtmgr
netTools
acl
ExtremeWare XOS 11.0 Command Reference Guide
Specifies the name of the processes being copied.
Tx Rx Sent Total
235 143 7 7 100% ON
0 0 0 0
0 0 0 0 100% ON
0 0 0 0
0 0 0 0
49 49 100 100 100% ON
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
256 4 0 0 100% ON
0 0 0 0
0 0 0 0
14 2 0 0 100% ON
0 0 0 0
0 0 0 0
2 2 0 0 100% ON
0 0 0 0
0 0 0 0
command.
show switch
% Chkpt Debug-info
OK 1 (00008853)
0% ON OK 1 (000008D3)
OK 1 (000008D3)
0% ON OK 1 (000008D3)
0% ON OK 1 (000008D3)
OK 1 (000018D3)
0% ON OK 1 (000018D3)
0% ON OK 1 (000018D3)
0% ON OK 1 (000008D3)
0% ON OK 1 (000008D3)
OK 1 (000008D3)
0% ON OK 1 (000008D3)
0% ON OK 1 (000008D3)
OK 1 (000008D3)
0% ON OK 1 (000008D3)
0% ON OK 1 (000008D3)
OK 1 (000008D3)
0% ON OK 1 (000008D3)
0% ON OK 1 (000008D3)
show checkpoint-data
133