Enable Snmp Traps - Extreme Networks ExtremeWare Command Reference Manual

Version 7.0.0

Hide thumbs Also See for ExtremeWare:

Table of Contents

enable snmp traps

Turns on SNMP trap support.

Syntax Description

This command has no arguments or variables.

Usage Guidelines

An authorized trap receiver can be one or more network management stations on your network. The

switch sends SNMP traps to all trap receivers.

The following command enables SNMP trap support on the switch:

enable snmp trap

This command was first available in ExtremeWare 2.0.

Platform Availability

This command is available on all platforms.

ExtremeWare Software 7.0.0 Command Reference Guide

Extremeware 7.0.0