Configure Sntp-Client Update-Interval - Extreme Networks ExtremeWare XOS Command Reference Manual
Version 11.0
Hide thumbs
Also See for ExtremeWare XOS:
- Command reference manual (2024 pages) ,
- Manual (698 pages) ,
- Command reference manual (1712 pages)
Table of Contents
Advertisement
Commands for Managing the Switch
configure sntp-client update-interval
configure sntp-client update-interval <update-interval>
Description
Configures the interval between polls for time information from SNTP servers.
Syntax Description
update-interval
Specifies an interval in seconds.
Default
64 seconds.
Usage Guidelines
None.
Example
The following command configures the interval timer:
configure sntp-client update-interval 30
History
This command was first available in ExtremeWare XOS 10.1.
116
ExtremeWare XOS 11.0 Command Reference Guide
Advertisement
Table of Contents
